Dust Suppression System--Fog Cannon Professionalمنذ 3 أسابيع - Services - Guelma - 183 الآراء
Fog cannon machine, also known as mist cannon machine and water mist cannon spraying machine, is a device specially developed for dust suppression. Now the equipment can be used to print dust in the environment or in places with large dust such as mines, docks, and stone quarries. The sprayed water mist can well condense with the dust, and the dust falls under the action of gravity, and the dust removal and dust suppression effect is remarkable.
Why do you need a fog cannon?
Long-term exposure to dust will cause harm to the human body. Dust may poison the human body, damage the cornea, cause pneumoconiosis, and affect skin health. The water mist sprayed by the fog cannon dust suppression system is the best device to suppress the split. Therefore, many factories, docks, transfer stations, mines, coal yards, etc. that generate a lot of dust will use this equipment for dust suppression.
Fog Cannon Model:
Fog cannon fan material: Q235. Q345 steel plate or 304 stainless steel material,
The thickness of the air duct steel plate is greater than 3mm
Fog cannon electrical control box: carbon steel control box or 304 stainless steel control box, with double door structure, the thickness of the control box is not less than 2mm
Explosion-proof fog cannon electrical control box:
(1) Carbon steel explosion-proof control box
(2) 304 stainless steel explosion-proof control box (overall thickness 4mm, flange thickness 12mm)
(1) Phase sequence protection, the fans, and pumps will not start when the phase sequence is reversed
(2) Overcurrent protection, when the current of the device is too large, the device will automatically stop running
(1) Low water pressure protection, when the water pressure is too low, the equipment will automatically stop running to protect the water pump
(2) Automatic drainage, when the equipment is shut down, the water in the pipeline is automatically drained
Heating: use self-limiting heat tracing cables to prevent ice from freezing on the spray ring and the water pump to meet the requirements of winter use
Nozzle selection: copper nozzle, high quality 304 stainless steel nozzle
Conditions for suppressing dust
Dust suppression requires two conditions:
1. There are enough dust particles and water droplets of the same size.
2. Dust particles and water droplets are in a closed area so that the agglomeration can fully occur and continue.
The high-pressure spray fan produced by Zhengtong can generate ultra-fine mist droplets through the strong wind formed by system pressurization and turbocharging. The weather can spray dust, decompose and desalinate the particle concentration in the air, and can effectively decompose the polluting particles and dust in the air, and effectively relieve the haze. According to reports, the purchase of such a big guy costs 50,000 to 150,000 yuan. The pollutant particles floating in the air are quickly forced to the ground to achieve the effect of cleaning the dust-reducing air.
Advantages compared to ordinary sprinklers:
The fog cannon can be directly installed at the rear of the sprinkler and can be atomized into beads equivalent to the dust by pressure. The energy is completely suppressed, and at the same time, the amount can be adjusted according to actual needs. Compared with the ordinary sprinkler, it can save 50%, and the resource rate is improved. The ordinary sprinkler only sprays along the nozzle to suppress the road dust, and cannot effectively and quickly solve the dust in the air.
YG machine manufacturer also supplies the environmental machine (fog cannon machine, slope hydroseeding machine), sanitary equipment(paper rewinding machine, toilet paper making machine, nonwoven bag making machine）， construction machine(Diamond Wire Saw Machine, concrete wall saw, rock splitter machine), wire mesh welding machine and other machines.