تسجيل الدخول لسرعة الوصول إلى أفضل الصفقات. انقر هنا إذا لم يكن لديك حساب.

How Gasification Works Professional

منذ شهر Automobiles Algiers   26 الآراء

-- دج

  • img
موقعك: Algiers
السعر: -- دج

Some of the most promising, attention-getting energy alternatives aren't revolutionary ideas. We all know about windmills and waterwheels, which have been around for centuries. Today, a variety of improvements, including innovative turbine designs, are transforming these ancient machines into cutting-edge technologies that can help nations satisfy their energy needs.

There's another old process -- one you probably don't know much about -- that's gaining in popularity and may join wind and hydropower in the pantheon of clean, renewable energy. The process is known as gasification, a set of chemical reactions that uses limited oxygen to convert a carbon-containing feedstock into a synthetic gas, or syngas.

It sounds like combustion, but it's not. Combustion uses an abundance of oxygen to produce heat and light by burning. Gasification uses only a tiny amount of oxygen, which is combined with steam and cooked under intense pressure. This initiates a series of reactions that produces a gaseous mixture composed primarily of carbon monoxide and hydrogen. This syngas can be burned directly or used as a starting point to manufacture fertilizers, pure hydrogen, methane or liquid transportation fuels.

Believe it or not, gasification has been around for decades. Scottish engineer William Murdoch gets credit for developing the basic process. In the late 1790s, using coal as a feedstock, he produced syngas in sufficient quantity to light his home. Eventually, cities in Europe and America began using syngas -- or "town gas" as it was known then -- to light city streets and homes. Eventually, natural gas and electricity generated from coal-burning power plants replaced town gas as the preferred source of heat and light.

Today, with a global climate crisis looming on the horizon and power-hungry nations on the hunt for alternative energy sources, gasification is making a comeback. The Gasification Technologies Council expects world gasification capacity to grow by more than 70 percent by 2015. Much of that growth will occur in Asia, driven by rapid development in China and India. But the United States is embracing gasification, as well.

Let's take a closer look at how this process works. We're going to start with coal gasification, the most common form of the process.

The heart of a coal-fired power plant is a boiler, in which coal is burned by combustion to turn water into steam. The following equation shows what burning coal looks like chemically: C + O2 --> CO2. Coal isn't made of pure carbon, but of carbon bound to many other elements. Still, coal's carbon content is high, and it's the carbon that combines with oxygen in combustion to produce carbon dioxide, the major culprit in global warming. Other byproducts of coal combustion include sulfur oxides, nitrogen oxides, mercury and naturally occurring radioactive materials.

The heart of a power plant that incorporates gasification isn't a boiler, but a gasifier, a cylindrical pressure vessel about 40 feet (12 meters) high by 13 feet (4 meters) across. Feedstocks enter the gasifier at the top, while steam and oxygen enter from below. Any kind of carbon-containing material can be a feedstock, but coal gasification, of course, requires coal. A typical gasification plant could use 16,000 tons (14,515 metric tons) of lignite, a brownish type of coal, daily.

A gasifier operates at higher temperatures and pressures than a coal boiler -- about 2,600 degrees Fahrenheit (1,427 degrees Celsius) and 1,000 pounds per square inch (6,895 kilopascals), respectively. This causes the coal to undergo different chemical reactions. First, partial oxidation of the coal's carbon releases heat that helps feed the gasification reactions. The first of these is pyrolysis, which occurs as coal's volatile matter degrades into several gases, leaving behind char, a charcoal-like substance. Then, reduction reactions transform the remaining carbon in the char to a gaseous mixture known as syngas.

Carbon monoxide and hydrogen are the two primary components of syngas. During a process known as gas cleanup, the raw syngas runs through a cooling chamber that can be used to separate the various components. Cleaning can remove harmful impurities, including sulfur, mercury and unconverted carbon. Even carbon dioxide can be pulled out of the gas and either stored underground or used in ammonia or methanol production.

That leaves pure hydrogen and carbon monoxide, which can be combusted cleanly in gas turbines to produce electricity. Or, some power plants convert the syngas to natural gas by passing the cleaned gas over a nickel catalyst, causing carbon monoxide and carbon dioxide to react with free hydrogen to form methane. This "substitute natural gas" behaves like regular natural gas and can be used to generate electricity or heat homes and businesses.

But if coal is unavailable, gasification is still possible. All you need is some wood.

Coal gasification is sometimes called "clean coal" because it can be used to generate electricity without belching toxins and carbon dioxide into the atmosphere. But it's still based on a nonrenewable fossil fuel. And it still requires mining operations that scar the Earth and leave behind toxic wastes of their own. Wood gasification -- or biomass gasification, to be more technically correct -- may provide a viable alternative. Biomass is considered a renewable energy source because it's made from organic materials, such as trees, crops and even garbage.

Biomass gasification works just like coal gasification: A feedstock enters a gasifier, which cooks the carbon-containing material in a low-oxygen environment to produce syngas. Feedstocks generally fall into one of four categories:

تفاصيل اضافية

Car Brand Alfa Romeo