It is composed of feeding, shell breaking Professionalمنذ 8 أشهر - Real estate - Makouda - 183 الآراء
Drying machines can be divided into two types: industrial and civilian. Industrial dryers are also called drying equipment or dryers. Civilian dryers are a type of washing machine. They are generally used to remove clothing and other textiles after washing with water. of moisture. The dryer has several modes such as belt drying, tumble drying, box drying, tower drying, etc. The heat source includes coal, electricity, gas, etc.; the material has hot air flow type and radiation type in the drying process. , Hot air tumble drying is that the hot air moves forward from the tail, fully contacts the material, and makes full use of the heat transfer through heat conduction, convection and radiation; the heat energy is directly transferred to the material, so that the moisture of the material is continuously evaporated in the cylinder, and the material is fed. The air induction device at the mouth draws out a large amount of moisture and wet air to prevent secondary pollution caused by dust discharge; through the internal spiral stirring, sweeping, and plate copying, the movement of materials is promoted to complete the entire drying process; countercurrent conduction dehumidification, Avoid reducing repeated drying cycles.
A sheller machine is a machine that crushes and peels the shells of oilseeds and nuts. It is composed of feeding, shell breaking, shell kernel separation, discharging, adjusting and other mechanisms. According to the working principle of the shell breaking mechanism, it is divided into disc type, knife plate type, knife cage type, centrifugal type, roll type, etc. The material is crushed by grinding, shearing, extrusion or impact, and the shell is removed by the shell and kernel separation mechanism composed of a fan and a sieve to obtain pure nuts.
The meat and bone grinder is a granular meat stuffing that meat processing enterprises process raw meat according to different technological requirements in the production process. and other meat products. It is made of high quality (iron casting) or stainless steel, which is non-polluting to the processed materials and meets the food hygiene standards. The tools are specially heat-treated, with superior wear resistance and long service life. The machine is simple to operate, easy to disassemble and assemble, easy to clean, and has a wide range of processed products. The tool can be adjusted or replaced at will according to the actual use requirements.