Understanding Metal Stamping Professionalمنذ شهرين - Multimedia - Saïda - 45 الآراء
As you know,the conduit fittings as attachment or accessories for electrical conduit,so we called electrical fitting,conduit fitting or conduit accessories in general.They are used for connect the conduit for easier run the wires in whole house and connect to your electronic appliance.Different conduit has different fitting for connect,you must be pay more attention the size and standard before purchased.
The Benefits of Electrical Fittings
Maybe you never thought about this issue seriously, but what happens if we don't have fittings?
(1) Easy to Connecting Conduit & Running Wire
If you don't have a bend or reducer on hand,you will be crazy.
We can't arrange the pipes and wires in a straight line for the whole house which is determined by the geometry.In most cases,it is necessary to turn at the corner and to arrange the wire under or on the wall such as ceiling lamp installed.
However,you need to repair part of the tube sometimes for it is damaged,but you can not replace all of them instead of repair part of a pipe.So the fittings can help you to do this.
(2) Protect Wires
Good quality conduit can be kept safe of your wire,but it need to match with nice quality fittings too.For example, If you encounter a 90° corner, there is no bend or related fitting on hand.When we run the wire directly and through the pipe, this may cause additional bending and pressure on the wire insulation layer,resulting in whitening of the insulation layer and faster aging.Once the insulating layer fails, there may be a risk of electric shock.
Moreover,a well-sealed conduit will reduce the probability of water and dust entering,which not only keeps the pipe clean, but also protects the safety of the wires.
(3) Easy to Pull the Wires
If you need to modify the direction or position of the previous wiring for some reason,and we supposed you do not have any special tools.It is the wrong way to pull the wire directly from the right-angle wire tube because this will damage the insulation layer of the wire during the process of pulling the wire,which may cause danger in some cases.Moreover, pulling the wire in this way is easy to get stuck and increasing in construction time.
The Difference Between Hot-Dip Galvanizing And Cold Galvanized
Hot-dip galvanizing and cold galvanized the difference: