تسجيل الدخول لسرعة الوصول إلى أفضل الصفقات. انقر هنا إذا لم يكن لديك حساب.

Use and installation of dry filter _ system Professional

منذ شهر Multimedia Salah Bey   71 الآراء

-- دج

  • img
موقعك: Salah Bey
السعر: -- دج

Original title: Use and installation of drying filter In the refrigerant system, many harmful 4. Molecular sieve: It filters large particles of solid impurities, mainly absorbs water, which is 3-4 times that of other substances, and can also absorb acidic substances nearby. 5. Activated alumina: absorbs water, mainly acidic substances. 6. Activated carbon: It absorbs paraffin, but because the refrigerant oil will precipitate paraffin only when the temperature is below -35 degrees, nutsche filter dryer ,wiped film evaporator, it is not needed in the system operating at medium ation of dry filter: Filter-driers for the liquid line and filter-driers for the suction line all remov avoided if there is a filter in front of it; 2. The gas-liquid separator is required to be installed as close as possible to the compressor. For the drying filter in the liquid pipe of the heat pump system, because of the bidirectional flow, there are some special installation. In practical application, there are the following common designs: 1. Only installed on the refrigeration cycle; 2. Use four one-way valves to set the reservoir,wiped film distillation, drying filter and expansion valve on the common pipeline, then refrigeration and heating can be used; 3. Two one-way valves and two drying filters are used to work in the refrigeration and heating cycle respectively; 4. Use two-way drying filter. In addition to the drying and filtering work of the normal refrigeration system, the drying filter also has an important function of cleaning the system after the compressor is burned down. Return to Sohu to see more Responsible Editor:. toptiontech.com