-- دج

TYPE 1

A type 1 snagging wheel has a straight profile and a relatively small diameter of about 2 to 4 inches. Its size makes it ideal for use on high-speed die grinders for grinding off excess metal. Weiler Abrasives' type 1 snagging wheels incorporate aluminum oxide grains for a long life grinding and a consistent cut-rate.

TYPE 27

Type 27 is by far the most common abrasive grinding wheel. Type 27 grinding wheels differ from other wheels in that they have a flat profile with a depressed center. A depressed center allows for clearance when the operator must work at a constrained angle. Using a wheel with a depressed center allows for a range of grinding angles, typically from 0 to 45 degrees. However, the optimal angles for working with type 27 grinding wheels range from 25 to 30 degrees. The steeper the grinding angle, the more aggressive the cut will be. Working at shallow angles with these wheels requires some consideration of potential ramifications. Grinding at shallow angles can prolong the wheel's lifespan, but it also often compromises the cut-rate. On harder materials, shallow grinding angles may also increase unwanted vibration and chatter.

TYPE 28

Type 28 grinding wheels, also known as saucer wheels, have similarly depressed centers and are optimized for low grinding angles. They differ from type 27 wheels in that their concave or saucer-shaped design allows for better access to the workpiece - especially in tighter areas, such as corners, fillets and overhangs - and increased aggression at smaller working angles. They can work at angles between 0 and 30 degrees but typically work best for use with grinding angles from 0 to 15 degrees.

Except for grinding disc, there are also other kinds of disc like Alumina Flap Disc, Zirconia Flap Disc, Ceramic Flap Disc, Sandpaper Disc, Cutting Disc and T41 Inox Cut Disc. And also another kind of indispensable material is Sandpaper including Film Backing Sandpaper, Sanding Sponge and Sanding Block.